Rokamat PFM Plaster Finishing Machine – Dry 110v

£1,023.00 Excl. VAT£985.00 Excl. VAT

Rokamat PFM Plaster Finishing Machine - Dry 110v £1,227.60 Incl. VAT £1,023.00 Excl. VAT£1,182.00 Incl. VAT£985.00 Excl. VAT

Free UK shipping on tool orders over £150 *

  • Interest-Free Credit  with PayPal, Pay In 3
  • Order before 12:30 pm for same-day dispatch
Guaranteed Safe Checkout

Rokamat PFM Plaster Finishing Machine – Dry 110v
£1,227.60 Incl. VAT £1,023.00 Excl. VAT£1,182.00 Incl. VAT£985.00 Excl. VAT
CES Contact

Rokamat DRY

The Rokamat PFM Plaster Finishing Machine – Dry 110v is extremely comfortable to use. Using the Rokamat dry to sponge float your plaster or render could increase your job speed by 50%. The handpiece weighs just 2.4 kg and can be run along the wall with little effort and high precision, whilst the drive is easy to mount on a waist-belt separated from the tool. Due to the long handle of the ROKAMAT DRY, a ladder is usually not required for the standard height of the room.

An even surface structure is ensured by the large support surface of the rotary plate, available with a diameter of 250 mm (adhesive system) or 350 mm (hook-and-loop system). (Included in delivery are supporting plates and sponge floats 350 mm.) Optimum matching to the background allows for continuous speed regulation between 120 and 350 r.p.m.


  • Machining plaster, lime-cement render and clay plaster
  • Abrading render and plaster
  • Gypsum multi finish
  • Machining of fine finish plaster
  • Smoothing concrete elements
  • Sponging filler compounds


  • Lightweight.
  • Uniform structure through large-headed work surface.
  • High speed through work (saving approximately 50% of the time).
  • Continuous speed control for optimal working.
  • Brake proof.
  • Workpiece/drive separation improves weight distribution and reduces soiling.


The plaster finishing machine for purists – without any frills whatsoever. That makes the PFM the lightest plaster finishing machine in our portfolio (hand tool only 1,3 kg). This is ensured by the well-established and reliable Rokamat concept: the separation of hand tool and motor (the latter is worn on a belt or shoulder strap). In addition to reducing weight, this feature also largely protects the motor from soiling.

 Select any speed between 75-340 min-1, thus adapting it to fit your requirements.

The PFM is not just suited for plaster finishing. Thanks to a wide scope of accessories, it is also ideal for smoothing concrete elements and gypsum multi-finish.

The special connection tube allows for an unobstructed view of the working surface and makes it possible to reach higher areas, too.

Whether it is plaster, lime-cement render, clay plaster, synthetic resin plaster, mineral plaster or silicate plaster – the PFM is just itching to get to work!

The PFM was formerly known as ROKAMAT DRY.

Technical data

Power consumption1 000 W
Idle motor speed75-340 rpm
Net weight hand tool1,3 kg
Total weight4,9 kg
Accessory head size250/350 mm

Additional information

Weight10 kg